# Flying with Equipment Cases: Airline Rules, ATA 300 and Transit Prep

> How to prepare a protective case for airline travel: the 158 cm checked limit, what ATA 300 Category 1 means for tour cases, batteries, locks and pressure valves.

Human-readable page: https://kexinn.org/airline-travel-with-equipment-cases/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-TRV-011**REV 2026-09-21CLASS: PUBLIC

## Flying with Equipment Cases: Airline Rules, ATA 300 and Transit Prep

Direct answer

Most airlines accept checked cases up to **158 cm (62 in)** in total linear dimensions and 23 kg standard weight, beyond which oversize/overweight fees apply. Professional flight cases are built to ATA 300 Category 1 for repeated air transport. The two most common travel problems are lithium-battery rules — which apply to your contents, not the case — and cabin-altitude pressure differences that bulge or lock a fully sealed case unless it has a pressure relief valve.

## §01Checklist before the airport

- **Measure L+W+H including wheels and handles.** 158 cm is the common checked limit; confirm with the carrier, low-cost airlines are stricter.
- **Lithium batteries:** spare lithium-ion batteries and power banks go in carry-on, ≤100 Wh generally without approval; installed batteries follow equipment rules. Airline cargo rules may differ from passenger rules.
- **Locks:** use TSA-compatible locks for US-bound checked baggage so security can open without cutting latches.
- **Pressure valve:** confirm it is clean and moving freely; a sealed case from a cold hold will equalize with an audible hiss on arrival.
- **Documentation for pro gear:** a serial-numbered photo manifest speeds both customs and insurance claims.

## §02Passenger flight vs air freight

| Mode | Governing rules | Certification to look for |
|---|---|---|
| Checked baggage | airline conditions of carriage; IATA lithium rules | case robustness is your own risk |
| Air freight (cargo) | IATA T1/T2 packaging rules, DG where applicable | ATA 300 Cat. 1, ISTA procedures |
| Touring/demo programs | repeated trips, handlers, trucking legs | ATA 300 Cat. 1 with flight-grade hardware |

## §03Why the case feels different after a flight

Cargo holds are pressurized to roughly 2,400 m equivalent altitude, and temperatures swing far outside cabin range. A sealed case experiences both a vacuum on ascent and overpressure on descent. Membrane pressure valves equalize automatically; twist valves should be opened shortly before and after the flight. Neither is a safety issue for the aircraft — it is purely about protecting your latches and gaskets.

## Frequently asked questions

### Can I check a protective case as regular luggage?

Yes, subject to the airline's size and weight limits — commonly 158 cm (62 in) linear and 23 kg standard, with fees beyond. Remove or carry on spare lithium batteries and check TSA-lock requirements for US flights.

### What is an ATA 300 flight case?

A container built to ATA 300 Category 1 — designed and tested for repeated commercial air-shipment trips, commonly quoted as at least 100, with ball corners, edge extrusions and hardware rated for handler abuse.

### Why did my waterproof case bulge or hiss after landing?

Cabin-altitude pressurization and temperature changes trapped a pressure difference inside the sealed case. A membrane relief valve equalizes it automatically; if yours lacks one, open a twist valve before departure.

### Are power banks allowed inside checked equipment cases?

No. Spare lithium-ion batteries and power banks must travel in carry-on baggage under IATA rules. Equipment with installed batteries has separate provisions — check both airline and destination rules.

## Related guides

[KB-OEM-010Custom OEM Protective Cases: Realistic Timeline From RFQ to Shipment](https://kexinn.org/custom-oem-case-timeline/)[KB-BRD-012Branding a Protective Case: Pad Printing vs Laser vs In-Mold Labeling](https://kexinn.org/case-branding-options/)[KB-MOQ-013Why Custom Cases Have a Minimum Order Quantity (and What Drives It)](https://kexinn.org/oem-case-moq-explained/)

REF KB-TRV-011 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
