# PP vs ABS vs Rotomolded PE vs Aluminum: Case Materials Compared

> A comparison of the four common protective case shell materials — polypropylene, ABS, rotomolded polyethylene and aluminum — covering weight, impact behavior, temperature range and cost.

Human-readable page: https://kexinn.org/case-materials-compared/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-MAT-002**REV 2026-09-21CLASS: PUBLIC

## PP vs ABS vs Rotomolded PE vs Aluminum: Case Materials Compared

Direct answer

Polypropylene (PP) injection molding is the default for lightweight, watertight consumer and light-industrial cases; ABS gives a stiffer, better-finished shell at higher weight and cost; rotomolded polyethylene wins on extreme impact durability and low-temperature toughness at the cost of weight; aluminum suits EMI shielding and high-heat duty but dents and costs more.

## §01Comparison at a glance

| Property | PP (injection) | ABS (injection) | PE (rotomolded) | Aluminum |
|---|---|---|---|---|
| Density | ≈0.90 g/cm³ (floats) | ≈1.05 g/cm³ | ≈0.94 g/cm³, thick walls | 2.7 g/cm³ |
| Impact behavior | good, ductile | stiffer, can crack | excellent, absorbs hits | dents, rarely fails |
| Low-temp limit (typical) | −20 to −40 °C (compound-dependent) | ≈−20 °C | −40 °C and below | no embrittlement |
| Continuous heat (typical) | 60–90 °C | 70–85 °C | 70–90 °C | >150 °C |
| Water sealing | excellent with gasket | excellent with gasket | excellent | good, seams matter |
| UV life (unstabilized) | moderate | poor–moderate | good with additives | excellent |
| Tooling cost | high (mold) | high (mold) | low–moderate (cast mold) | sheet tooling |
| Unit cost at volume | low | medium | medium–high | high |

## §02How to choose

- **Choose PP** for the best weight-to-cost ratio, chemical resistance and buoyancy — the standard for tool cases, equipment cases and most OEM programs at production volume.
- **Choose ABS** when appearance matters: higher gloss, better paintability and stiffness for panel-mounted interiors. It is heavier and less forgiving at low temperature.
- **Choose rotomolded PE** for brutal duty — military, outdoor, overland — where a thick, stress-free shell and −40 °C toughness outweigh the weight penalty.
- **Choose aluminum** for EMI/RFI shielding, high ambient heat, or fire-adjacent duty, accepting dents and higher cost.

## §03The hybrid pattern

Many leading brands use PP shells with PE or TPE end caps and handles: injection molding delivers the precise gasket groove and latch bosses, while softer overmolds absorb shock at the corners. When comparing quotations, ask which resin grades and wall thicknesses are specified — "polypropylene case" can span a wide quality range.

## Frequently asked questions

### Which case material is the most durable?

Rotomolded polyethylene is the most impact-tolerant of the four mainstream materials because of its thick, nearly stress-free walls. For most commercial duty, a well-designed PP case at 4–5 mm wall thickness is durable enough and much lighter.

### Are polypropylene cases waterproof?

Yes, when the design includes a tongue-and-groove gasket and reliable latches. PP itself does not absorb water; the sealing comes from the gasket system, which is why IP ratings are tested on the assembled case.

### Why do rotomolded cases weigh more?

Rotational molding produces wall thicknesses of roughly 3–6 mm across the whole shell versus 1.5–3 mm for injection molding, so the same-size case carries significantly more resin mass.

### Do plastic cases crack in cold weather?

Unmodified PP becomes brittle below about −20 °C, and ABS is similar. Copolymer PP compounds and LLDPE rotomolding resins stay ductile to −40 °C, which is why cold-chain and winter field equipment usually specifies them.

## Related guides

[KB-IPR-001What Do IP Ratings Actually Mean for Protective Cases?](https://kexinn.org/ip-ratings-explained/)[KB-FOM-003Foam Inserts for Protective Cases: EPE vs EVA vs PU vs CNC-Cut](https://kexinn.org/foam-insert-guide/)[KB-SIZ-004How to Choose the Right Protective Case Size](https://kexinn.org/how-to-size-a-protective-case/)

REF KB-MAT-002 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020

Typical values for commercial compounds; verify against the specific resin datasheet.
