# Drop and Impact Standards for Protective Cases: MIL-STD

> What MIL-STD-810 (Method 516), ATA 300 Category 1 and ISTA procedures actually test, how the 26-drop sequence works, and how to read a manufacturer&#x27;s drop claim.

Human-readable page: https://kexinn.org/drop-and-impact-standards/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-STD-005**REV 2026-09-21CLASS: PUBLIC

## Drop and Impact Standards for Protective Cases: MIL-STD-810, ATA 300 and ISTA

Direct answer

A credible drop claim names three things: the standard, the procedure and the height. MIL-STD-810 Method 516 covers mechanical shock (transit drop procedures are commonly run as a 26-drop sequence — 6 faces, 8 corners, 12 edges); ATA 300 Category 1 certifies a container for at least 100 repeated air-shipment trips; ISTA procedures test the packaged product through a defined distribution cycle. "Military-grade drop tested" without a procedure number is marketing, not a specification.

## §01The standards that matter

| Standard | What it verifies | Typical use |
|---|---|---|
| MIL-STD-810 (G/H), Method 516 | mechanical shock survival; procedure-defined drop heights | field equipment, defense-adjacent products |
| ATA 300 Cat. 1 | reusable air-transport container, ≥100 trips | flight cases, touring and demo kits |
| ISTA 1A–3A | packaged-product survival through a defined shipping cycle | e-commerce and freight validation |
| IEC 60068-2-31 | rough handling shocks (simple drop test) | IEC-aligned equipment specs |

## §02Reading the 26-drop sequence

The classic transit-drop routine drops the loaded container onto each of its 6 faces, 8 corners and 12 edges — 26 impacts — from a height tied to the package weight; heavier cases are typically dropped from lower heights (for example, on the order of 0.7–1.2 m depending on the procedure and mass). The pass criterion is usually that contents survive and the case remains functional and sealable — not cosmetically unmarked.

**How to interrogate a supplier:** ask "Which method and procedure? What drop height? Loaded or empty? Pass criteria?" A manufacturer who runs the tests can answer all four in one sentence; one who cannot is reselling someone else's marketing.

## §03Beyond the drop: the rest of 810

MIL-STD-810 is a menu of environmental test methods, not a single certificate: Method 501/502 cover high/low temperature, 503 thermal shock, 504/505 contamination by fluids/sand, 507 humidity, 514 vibration. Serious protective-case makers publish which methods their shells have passed, because buyers' compliance engineers must map them to their own product requirements.

## Frequently asked questions

### What does MIL-STD-810 drop tested actually mean?

It should mean the case passed a named procedure in Method 516 (shock), usually a transit-drop sequence such as 26 drops over faces, corners and edges, at a stated height. The standard itself defines methods, not a universal pass level — always ask which procedure and height.

### Is ATA 300 Category 1 the same as drop tested?

No. ATA 300 Category 1 certifies that a container is built for repeated air transport — commonly quoted as at least 100 trips — including its handling hardware. Drop survival is verified under the shock procedures of MIL-STD-810 or similar, not by ATA 300 alone.

### What drop height should a protective case survive?

For general industrial equipment, 1.0–1.2 m (roughly waist height) is a common target for a loaded case. Heavier cases are tested from lower heights because the impact energy scales with mass.

### Do drop tests include the contents?

A meaningful test is run with the real or simulated payload. An empty case can survive a drop that destroys its contents, because foam and shell work together as a system.

## Related guides

[KB-SIZ-004How to Choose the Right Protective Case Size](https://kexinn.org/how-to-size-a-protective-case/)[KB-HDW-006Why Watertight Cases Need a Pressure Relief Valve](https://kexinn.org/pressure-relief-valves/)[KB-HDW-007Case Gaskets, Latches and Hinges: The Hardware That Decides Lifespan](https://kexinn.org/gaskets-latches-and-hinges/)

REF KB-STD-005 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
