# Export Packing for Protective Cases: Master Cartons, Pallets and Container Loading

> How protective cases are packed for export — individual cartons, master cartons, pallet patterns and how many cases fit in a 20ft or 40ft container.

Human-readable page: https://kexinn.org/export-packing-and-container-loading/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-LOG-017**REV 2026-09-21CLASS: PUBLIC

## Export Packing for Protective Cases: Master Cartons, Pallets and Container Loading

Direct answer

Export packing for cases is three layers: the case itself (often with a protective bag or film), a master carton for batches of 1–6 cases depending on size, and pallets or loose floor-loading into the container. A 20ft container offers about 33 cbm of usable volume and a 40ft high-cube about 76 cbm — case counts are estimated by dividing those volumes by the packed case volume including carton and pallet slack.

## §01Packing layers

| Layer | Purpose | Design notes |
|---|---|---|
| Case film/bag | scuff + dust protection | PE bag or stretch film; foam corners for premium finishes |
| Master carton | unit handling + retail presentation | double-wall corrugated; stack rating printed on box |
| Pallet layer | mechanical handling | EUR 1200×800 or US 1219×1016; stretch-wrap + straps |
| Container | ocean leg | 20ft GP ≈33 cbm; 40ft HC ≈76 cbm; floor-load only for oversized |

## §02Estimating your load

1. Get the **packed dimensions** (carton, not case) from the supplier — cartons add 10–15 % to each dimension.
2. Compute carton volume, add **15–20 % pallet/void slack** for palletized loads (less for floor-loaded).
3. Divide container usable volume by that figure; sanity-check against **weight limits** (a 20ft payload cap is around 21–28 t depending on the line — cases rarely hit it).
4. For mixed orders, load heavy carton batches low and light ones high; cases are rigid and stack well, which is one of their freight advantages.

**Freight tip:** cases nest well but cartons do not compress — the enemy is void fill. Ask the supplier to design the master carton so that a full pallet layer forms a stable pattern (e.g., 2×2 or 3×2 per layer) before finalizing the carton size.

## Frequently asked questions

### How many protective cases fit in a 20ft container?

Divide ~33 cbm of usable volume by the packed carton volume of each case including pallet slack. A medium case with a 0.03 cbm packed carton yields roughly 900–1,000 units palletized; always get the supplier's packed dimensions rather than case dimensions.

### Should cases be palletized or floor-loaded?

Palletize for anything moving through more than one handling point — mechanical loading reduces damage and theft risk. Floor-loading squeezes in more volume for oversized cases that cannot be palletized efficiently.

### Do cases need master cartons if they are already rigid?

The carton protects the case's finish and carries labels/stack ratings, and consolidates units for handling. Premium-finish and presentation cases especially benefit; raw industrial fleets sometimes ship in film only.

### What Incoterm affects export packing?

Seller-side packing standards apply up to the agreed handover point (e.g., FOB). Buyers with stricter destination requirements — ISPM-15 pallet heat treatment, retail-ready cartons — must state them in the order, not at the port.

## Related guides

[KB-QC-016Pre-Shipment Inspection for Protective Cases: What to Check and AQL Basics](https://kexinn.org/case-pre-shipment-inspection/)[KB-EMI-018EMI and RFI Shielding Cases: When Plastic Is Not Enough](https://kexinn.org/emi-rfi-shielding-cases/)[KB-MST-019Moisture and Corrosion Control Inside Protective Cases](https://kexinn.org/moisture-and-corrosion-control-in-cases/)

REF KB-LOG-017 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020
