# Protective Cases in Heat, Cold and Sunlight: Temperature and UV Performance

> Realistic temperature ranges for PP, ABS and PE cases, what UV exposure does to plastics over years, and the stabilizer additives that extend outdoor life.

Human-readable page: https://kexinn.org/temperature-and-uv-performance/
Site overview for AI agents: https://kexinn.org/llms.txt

## Page content

DOC **KB-ENV-008**REV 2026-09-21CLASS: PUBLIC

## Protective Cases in Heat, Cold and Sunlight: Temperature and UV Performance

Direct answer

Plastic case shells have three separate limits: short-term heat (softening), long-term cold (embrittlement) and UV dose (surface degradation). Typical service ranges are −20 to +60 °C for standard ABS and PP, −40 to +80/90 °C for cold-compounded PP or rotomolded PE, and effectively no low-temperature limit for aluminum. Outdoors, UV-stabilized compounds and dark colors age far slower than unstabilized bright plastics.

## §01Heat: short-term vs continuous

| Material | Continuous service (typical) | Short-term peak | Cold limit (typical) |
|---|---|---|---|
| ABS | 70–85 °C | ≈95 °C | ≈−20 °C |
| PP (standard homo/copolymer) | 60–80 °C | ≈100 °C | −20 °C |
| PP/PE cold compounds | 80–90 °C | ≈110 °C | −40 °C |
| Rotomolded LLDPE | 70–90 °C | ≈100 °C | −40 °C and below |
| Aluminum | >150 °C | — | no embrittlement |

## §02UV: the quiet killer

UV breaks polymer chains at the surface, causing chalking, fading and micro-cracking that eventually reach the gasket groove. Three defenses matter: **UV stabilizers** (HALS and UV absorbers) in the compound, **carbon black pigment** — which is why black and dark-grey cases dominate outdoor fleets — and **wall thickness**, since degradation starts at the surface.

- Stabilized black PP/PE routinely serves 5–10+ years outdoors.
- Bright colors can be stabilized well, but pigment choice is narrower; ask for weathering test data (e.g., xenon-arc exposure hours) rather than promises.
- Where a case lives its whole life indoors, UV is irrelevant — do not pay for it, and prioritize impact and gasket performance instead.

## §03Thermal cycling

Repeated hot–cold cycles age gaskets and loosen screws faster than steady temperatures. For equipment that lives in vehicles or aircraft holds, thermal-shock testing (MIL-STD-810 Method 503) on the assembled case is a more honest specification than any single temperature extreme.

## Frequently asked questions

### Are plastic cases OK at −30 °C?

Only if the compound is rated for it. Standard PP and ABS get brittle around −20 °C; cold-compounded PP, copolymer grades and rotomolded PE stay ductile to −40 °C. Check the low-temperature specification, not just the shell material name.

### Why do black plastic cases last longer in the sun?

Carbon black pigment blocks UV penetration, and dark compounds are typically formulated with stabilizers for outdoor fleets. Bright unstabilized plastics chalk and fade fastest at the surface, which is where gasket grooves live.

### Can I leave a case in a hot car?

A closed car in sun reaches 60–70 °C, inside the continuous rating of most quality PP/PE cases but at or beyond ABS comfort. Contents matter more than the case: batteries, aerosols and optics have their own, lower limits.

### What does a −40 °C to +90 °C rating actually certify?

It means the manufacturer's compound and tests support ductility at −40 °C and dimensional/functional stability near +90 °C — usually short-term. Ask whether those figures are continuous or peak ratings and which test method backs them.

## Related guides

[KB-HDW-007Case Gaskets, Latches and Hinges: The Hardware That Decides Lifespan](https://kexinn.org/gaskets-latches-and-hinges/)[KB-BUY-009EXW vs FOB: Shipping Terms for Protective Case Buyers](https://kexinn.org/exw-vs-fob-for-case-buyers/)[KB-OEM-010Custom OEM Protective Cases: Realistic Timeline From RFQ to Shipment](https://kexinn.org/custom-oem-case-timeline/)

REF KB-ENV-008 · Published 2026-09-21 · Reviewed by the KeXin Materials engineering team · Sources: IEC 60529; ISO 6346; ATA 300; MIL-STD-810; Incoterms® 2020

Datasheet ranges vary by grade; a closed case in direct sun can run 20–30 °C above air temperature.
